Identificador: 2586
Abierta
.PNG)
Descripción
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NC
- Meet OSHA and CE safety standard
- 48” NC table back gauge with fingers
- Max. 16 bends per program
- Upto 100 Program Storage
- Programmable Angle/ Angle Correct
- NC ram height control for open hemming
- Hardened fingers and table
- Germany Rexroth hydraulic system
- Yaskawa Servo motors and Drives
- Schneider electrical components
- All steel construction for maximum rigidity
- Hydraulic logic system centrally located and quiet
- Safety type foot pedal with handle and E-stop switch
- Safety 24V low voltage & overload protection
Capacity: Mild Steel(hot roll)60K PSI Stainless Steel 85 K PSI Soft aluminum 28K PSI Hemming max thickness: |
10 Ga. 14 Ga. 1/4" 22 Ga. |
| Bending length capacity | 10' |
| Bend Angel Degree, programmable | 135 degree |
| Max. Box Depth | 153mm=6.02” |
| Large Beam Opening/Clamping Opening | 3" |
| Beam front/back adjustment | 1" |
| Min. Reverse Bend | 1" |
Max. Table Back Gauge Distance Min. Table Back Gauge Distance | 48-3/8" 1/4" |
| Back Gauge Repeatability | 0.0039" |
| Back Gauge Table Height | 35-3/4" |
| Assorted fingers | 3" 4" 5" 6" |
Main Motor
Servo Motor for back gauge |
10HP,220V/208V, 3ph (35amps)
1HP |
Hydraulic Oil Tank Capacity: Recommended hydraulic oil: | 32 Gal. Shell #68 or equivalent |
Machine Weight: Shipping weight: Machine Dimensions: Shipping Dimensions: | 11,550 lbs. 11,850 lbs. 175" x 93" x 76" 163" x 85" x 78" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD 26” X 120”
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD
26” X 120”
NUEVO
CON GARANTIAISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by high precision bearings A...
AMXmachinery1
FORMADORA DE METAL
FORMADORA DE METAL PARTE: 2GM-GMC PL-18HEMA reliable and versatile solution for professional fabricators. Designed for precision and durability, this machine is built to handle your hemming needs with ease, efficiency, and consistency.ISO 9001 certified4HP Heavy Duty AC main motor, 220V, 3 phaseHeavy welded all steel construction for maximum rigidityOne side forms Flattened Hem and Open HemOne side forms Teardrop Hem and Rope HemOne year warranty for part...
AMXmachinery1
TALADRO MULTIPLE 21-HUSOS PARA CONSTRUCCION
TALADRO MULTIPLE 21-HUSOS PARA CONSTRUCCION 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions. Has a robust fabricated steel construction with precision machined cast iron table. The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM. Each spindle i...
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...