Identificador: 2554
Abierta
.PNG)
Descripción
TORNO 32'' X 160'' 15 HP PARTE: 2GM-GML-32160
Heavy Duty Precision Gap Bed Lathe 32” x 160” 4-1/8” bore, 15HP Motor.
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- Solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
Max. swing over bed | 32” |
Max. length of workpiece | 160” |
Max. swing over cross slide | 26-7/16” |
Max. Swing in gap | 46-1/2” |
Width of Bed | 16” |
Effective length in gap to spindle | 10” |
Effective length in gap to chuck jaws | 7” |
Spindle bore | 4-1/8” , D1-8 |
Taper of spindle center | MT#5 with1:20 reducing sleeve |
Spindle speeds | 25-1,600 rpm / 12 steps |
Longitudinal feeds | 0.0016-0.055 IPR, 60 kinds |
Cross feeds | 0.0008-0.027 IPR, 60 kinds |
Inch threads | 80-7/16”TPI, 54kinds |
Metric threads | 0.45-120 mm , 54 kinds |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA CINTA 20" - 3HP
SIERRA CINTA 20" - 3HP 2CK-HB500RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design th...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
AMXmachinery1
MESA DE TIJERA - 4' x 8'
PARTE: 2CK-PH48-2 - MESA DE TIJERA - 4' x 8'Is strongly built with a massive steel frame that provides maximum durability and is capable of lifting up to 4400 lbs. It is hydraulically operated and controlled by a foot pedal for operator convenience. The PH48-2 is adjustable in height from 14” up to 71”. It is ideal for staging material for feeding into various woodworking machines like sanders, glue spreaders, panel saws, ripsaws, and more.4400 lifting capacity4’x8’ deck size14” t...
-500x500.png)
AMXmachinery1
ALIMENTADOR CON VELOCIDAD VARIABLE
ALIMENTADOR CON VELOCIDAD VARIABLE PARTE: 2CK-DC30Is a safe and powerful feeding unit for shapers, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The DC brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job. The universal stand allows for quick positional adjustment from a...