Identificador: 2545
Abierta
ID de articulo : # 1810 se ha agregado a su lista de deseos.
Descripción
FINGER JOINT AUTOMATICA PARTE: 2CK-FL12
Represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for enduring reliability, ensuring consistent performance year after year. With its pioneering technology, this system delivers exceptional value, redefining industry standards in terms of both performance and return on investment, establishing itself as a constant catalyst for innovation in the wood industry.
- Excellent return on investment
- Fully automatic operation for short workpieces with high speed and throughput
- Only two operators are needed for maximum production
- Servo motor drive provides a production rate of up to 2~3 cycles/min
- Workpieces automatically travel between profiling and the gluing station
- As standard PVAc glue is used, but there are optional gluing systems for PUR, MUF, EPI, etc. available upon request
- Length of cut is calculated by an encoder and set on a touch screen for increased accuracy
- Designed for 2~300 mm (0.079~11.8”) wood length
- The three initial F-I01 hand feeding tables automatically carry workpieces, allowing for continuous infeed by operator
- The F-C31 finger shaper performs scoring, trimming, shaping, and gluing on both ends of the workpiece
- The workpieces feed directly onto the F-D01 automatic feeding table, where workpieces are automatically turned over from vertical to horizontal by a brush wheel
- Synchronized jointing and length cutting is performed in a 2-step process within the F-A08 Assembly Press– the standard jointing length is 14 feet
F-I02 Hand Feeding Table
DESCRIPTION | SPECIFICATION |
Automatic feeding table | 650 mm (25.6“) |
Feed drive motor | 1 HP x3 |
Machine dimensions (L x W x H) | 3190 x 870 x 970 mm (126 x 35 x 39“) |
Packing dimensions (L x W x H) | 3300 x 970 x 1070 mm (130 x 39 x 43“) |
F-D01-12 Automatic Feeding Table
DESCRIPTION | SPECIFICATION |
Automatic feeding table | 650 mm (25.6“) |
Range of material length | 150~1000 mm (5.9”~39.4“) |
Range of material width | 30~160 mm (1.2~6.3“) |
Motor | 1 HP |
Brush wheel drive motor | 1/8 HP |
Machine dimensions (L x W x H) | 1440 x 2660 x 1330 mm (57 x 105 x 53“) |
Packing dimensions (L x W x H) | 1540 x 2760 x 1430 mm (61 x 109 x 57“) |
F-C31 Automatic Finger Shaper – Right End
DESCRIPTION | SPECIFICATION |
Max. available width working table | 650 mm (25.6”) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...
AMXmachinery1
FRENO PARA DOBLADORA DE METAL
FRENO PARA DOBLADORA DE METAL PARYE: 2GM-SB-1014ISO 9002 certifiedLarge 3” beam opening, adjustable1” beam adjustment (front and back)Stop rods for repeat bends(2) counter weightsAll steel heavy body construction with extra heavy tie rod for minimum deflectionBending Capacity: Mild Steel14 Ga.Bending Capacity: Stainless Steel18 Ga.Bending Length Capacity10'Bending Angle Degree0-135°Beam adjustment, front and back1"Minimum reverse bend5/16"Manual clampingSt...
AMXmachinery1
PARTE: 3AM-T-7040 - SIERRA CINTA PARA METAL - ALTA VELOCIDAD
PARTE: 3AM-T-7040 - SIERRA CINTA PARA METAL - ALTA VELOCIDADSaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorCore Selling Point: High-AccuracyBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessHydraulic Motor(kw): 0.09Blade Tension: HydraulicCoolant Motor (kw): 1.5Main Motor(kw): 5.5Max. Cutting Capacity(mm): Round:400mm, sqaure:400*710MMBlade Size(mm): 1.1*41*5720
AMXmachinery1
SIERRA CINTA 24" - 2 EN 1- 7.5HP
SIERRA CINTA 24" - 2 EN 1- 7.5HP - 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the HB600A unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 7.5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple desig...