Identificador: 2589
Abierta
ID de articulo : # 2545 se ha agregado a su lista de deseos.
ID de articulo : # 2583 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 16'' X 60'' PARTE: 2GM-GML-1660HD
16” x 60”, 2-1/16” bore, 6 HP
- ISO 9001 certified
- Large spindle bore 2-1/16”
- Heavy Duty spindle D1-6
- One-piece solid cast iron machine base
- Heavy Duty guideway width 10-1/4”
- Heavy Duty main motor 6 HP
- 16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm
- 45 kinds of inch threads, and 39 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- SINO DRO (installed)
- Taper turning attachment (installed)
- 8” 3-jaw chuck with one set of reversible jaws
- 10” 4-jaw chuck
- 12” Face plate
- 5 1/2” large steady rest with roller jaws (bearings)
- Oil pump on Apron for all guideways and leadscrews
- 2” follow rest with roller jaws (bearings)
- Removeable gap
- 4-way tools post
- Foot brake
- Halogen Work light and coolant system
- Full length splash guard
- (2) dead centers and (1) reducing sleeve MT6/MT4
- Thread chasing dial
- Tool box and leveling pads
| Max. swing over bed | 16 1/16" |
| Max. length of workpiece | 60" |
| Max. swing over cross slide | 10 1/4" |
| Max. Swing in gap | 23 1/4" |
| Width of Bed | 10 1/4" |
| Effective length in gap to spindle | 8 1/2" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 2 1/16" D1-6 |
| Taper of spindle center | M.T. #6 (MT6/MT4 sleeve) |
| Spindle speeds | 45-1,800 rpm / 16 steps |
| Longitudinal feeds | 0.0018-0.07 IPR, 42 kinds |
| Cross feeds | 0.0009-0.03 IPR, 42 kinds |
| Inch threads | 70-2 TPI, 45 kinds |
| Metric threads | 0.2-14 mm , 39 kinds |
| Diametral Pitch threads | 8-40 DP , 21 kinds |
| Module threads | 0.3-3.6 mm, 18 kinds |
| Max. travel of top slide | 4 1/4" |
| Max. travel of cross slide | 8 1/2" |
Spindle length w/o chuck Leadscrew length X TPI | 20 1/2" 1 1/4" x 4 TPI |
| Diameter of tailstock quill | 2 1/16" |
Max. travel of tailstock quill | 5" |
| Taper of tailstock quill center | MT4 |
| Main motor | 6 HP, 220V/20A, 3 Phase |
| Coolant pump | 1/8 HP, 220V, 3 Phase |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...
AMXmachinery1
SIERRA CINTA - REASERRADORA - 24 PULGADAS
PARTE: 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the bandsaw unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum maintenanc...
AMXmachinery1
ASTILLADORA - 15 PULGADAS
PARTE: 2TA-WG-1510 - ASTILLADORA - 15 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...
AMXmachinery1
PARTE: 2CK-EM12 - CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS - 12" ANCHO
PARTE: 2CK-EM12 - CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS - 12" ANCHOIs specially designed for hardwood flooring and wall/ceiling paneling up to 12” wide. Its compact design with continuous through feed system allows for maximum output in a small space. Equipped with a user-friendly touch screen interface allow for simple operation with excellent performance and error diagnostics. The dual counter-rotating cutterheads produce both the tongue and groove simultaneously en...