Identificador: 106
Abierta
ID de articulo : # 106 se ha agregado a su lista de deseos.
Descripción
BOLSAS DE REPUESTO PARA COLECTORES DE ASERRIN
COLECTOR 1 HP
MEDIDAS BOLSA: 55 CMS DIAMETRO X 81 CM LARGO
R-DC2041-BSF BOLSA DE TELA SUPERIOR FUNCION DE FILTRO
R-DC2041-BID BOLSA D TELA FUNCION DEPOSITO DE ASERRIN
COLECTOR 2 HP
R-DC2042-BSF BOLSA DE TELA SUPERIOR FUNCION DE FILTRO
R-DC2042-BID BOLSA D TELA FUNCION DEPOSITO DE ASERRIN
COLECTOR 3 HP
R-DC2043-BSF BOLSA DE TELA SUPERIOR FUNCION DE FILTRO
R-DC2043-BID BOLSA D TELA FUNCION DEPOSITO DE ASERRIN
COLECTOR 5 HP
R-DC2045-BSF BOLSA DE TELA SUPERIOR FUNCION DE FILTRO
R-DC2045-BID BOLSA D TELA FUNCION DEPOSITO DE ASERRIN
COLECTOR 7 HP
R-DC2047-BSF BOLSA DE TELA SUPERIOR FUNCION DE FILTRO
R-DC2047-BID BOLSA D TELA FUNCION DEPOSITO DE ASERRIN
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
PARTE:
4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
Nueva con garantía
Demo
model with about 30 hours on it
Specifications
-
Comes with digital readouts on the vertical and horizontal axis, readout in
decimal inches or mm
-
Processing sheets both horizontally and vertically
-
Cutting height is 2100mm
-
Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”
-
Weight 2400 lbs
-
Thickness of cut i...
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...
AMXmachinery
PARTE: 12564 - PRENSA ARMADORA DE GABINETES - 98” ALTO X 55” ANCHO X 24” FONDO
PARTE:
12564 - PRENSA ARMADORA DE GABINETES - 98” ALTO X 55” ANCHO X 24” FONDONueva - Nunca UsadaUHLING - HP3000Vertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel