Identificador: 1142
Abierta
ID de articulo : # 1142 se ha agregado a su lista de deseos.
Descripción
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGE
PARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGE
PARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGE
PARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA 3 SIERRAS 12"
PARTE # 2TA-BS-1212HR-3 - REASERRADORA HORIZONTAL - 3 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...
AMXmachinery
LIJA BANDA - LIJADORA BASTONES
LIJA BANDA PARA LIJADORA BASTONESGRANO 80, 100 Y 120SIL-R-FUS220-80 - BANDA X 86-080 127 MM X 1.86 MTSSIL-R-FUS220-100 - BANDA X 86-100 127 MM X 1.86 MTSSIL-R-FUS220-120 - BANDA X 86-120 127 MM X 1.86 MTS
AMXmachinery
PARTE: 12523 – BASTONERA – HAWKER 1500
PARTE: 12523 – BASTONERA – HAWKER 1500
USADA – BUENAS CONDICIONES
Incluye:
1 torno Hawker 1500
1 cabeceadora para 15/16 y 7/8, Gonzalez-Heiras
2 cortadoras tipo trimer doble, Gonzales-Heiras
2 pulidoras horizontales
AMXmachinery
BASTONERA PARA PALOS CURVOS - CAPACIDAD 20-45 MM
PARTE: 4BR-TPC45
- BASTONERA PARA PALOS CURVOS - CAPACIDAD 20-45 MM
Nueva con garantía
Fotos y Características:
Datos tecnicos:
Diametro min. 20
mm.
Diametro max. 45
mm.
Radio minimo de
curva 90 mm.
Motor rotacion
utensilio 3 kw.
Motor avance 0,22
kw.
Productividad
(avance manual) 4 mt./min.
Productividad
(avance automatico) 2,5 -11 mt./min.
Medidas maquina
(pallet en madera) 80x120xh.130 cm.
Peso Bruto 190
Kg.
Descripcion:
...